Epoxy Hardener kg to Liters Converter
The Epoxy Hardener kg to Liters Converter turns kilograms of epoxy hardener (Part B) into liters at 0.98 kg/L.
Interactive Epoxy Hardener kg to Liters Converter Engine
Result = Value × Factor
How Epoxy Hardener kg to Liters Converter Works?
The Epoxy Hardener kg to Liters Converter works in 3 steps.
- 1
Enter the mass of hardener, Part B, in kilograms (kg).
- 2
Keep 0.98 kg/L for typical amine hardeners; polyamide hardeners run nearer 0.97 kg/L and phenalkamines near 1.0 kg/L.
- 3
Read the liters (L) and check the mix ratio against the resin volume.
Epoxy Hardener kg to Liters Converter Formula
The Epoxy Hardener kg to Liters Converter formula is:
Volume (L) = Mass of epoxy hardener (kg) ÷ 0.98 kg/LThe reverse formula is Mass (kg) = Volume of epoxy hardener (L) × 0.98 kg/L.
Worked example
25 kg (55.12 lb) of epoxy hardener ÷ 0.98 kg/L = 25.51 L (6.739 US gal).
Hardener ratios are chemical, not flexible. Adding 10% extra hardener leaves unreacted amine, which causes a soft, sticky or cloudy surface called amine blush.
Epoxy Hardener kg to Liters Converter Conversion Table
The Epoxy Hardener kg to Liters Converter table converts 12 masses of epoxy hardener from 0.5 kg (1.1 lb) to 1,000 kg (2,204.6 lb) into liters (L), US gallons and Imperial gallons at 0.98 kg/L (8.178 lb per US gallon).
| Mass (kg) | Mass (lb) | Volume (L) | Volume (US gal) | Volume (Imp gal) |
|---|---|---|---|---|
| 0.5 | 1.102 | 0.5102 | 0.1348 | 0.1122 |
| 1 | 2.205 | 1.02 | 0.2696 | 0.2245 |
| 2 | 4.409 | 2.041 | 0.5391 | 0.4489 |
| 5 | 11.02 | 5.102 | 1.348 | 1.122 |
| 10 | 22.05 | 10.2 | 2.696 | 2.245 |
| 20 | 44.09 | 20.41 | 5.391 | 4.489 |
| 25 | 55.12 | 25.51 | 6.739 | 5.611 |
| 50 | 110.2 | 51.02 | 13.48 | 11.22 |
| 100 | 220.5 | 102 | 26.96 | 22.45 |
| 200 | 440.9 | 204.1 | 53.91 | 44.89 |
| 500 | 1,102 | 510.2 | 134.8 | 112.2 |
| 1,000 | 2,205 | 1,020 | 269.6 | 224.5 |
What is Epoxy Hardener kg to Liters Converter?
The Epoxy Hardener kg to Liters Converter is a calculator that converts epoxy curing agent (Part B) from mass to volume at 0.98 kg/L. The hardener contains amine groups that crosslink epoxy resin molecules.
Hardener density sits close to water and below resin density. The difference means a 1:1 kit by volume is not 1:1 by weight.
What are the uses of Epoxy Hardener kg to Liters Converter?
There are 4 main uses of the Epoxy Hardener kg to Liters Converter: kit mixing, ratio conversion, inventory and shipping forms.
Kit mixing
Makers convert weighed hardener into volume for pump dispensers.
Ratio conversion
Formulators switch weight ratios into volume ratios.
Inventory
Shops convert hardener drums into kit counts.
Shipping forms
Distributors convert liters into kilograms for dangerous-goods paperwork.
Epoxy Hardener kg to Liters Converter FAQ
Is epoxy hardener lighter than resin?
Yes, amine hardener is usually about 15% lighter than epoxy resin per liter.
How many liters is 1 kg of epoxy hardener?
1 kg of epoxy hardener is about 1.02 L at 0.98 kg/L.
Related Chemicals, Resins & Solvents Tools
Ethanol kg to Liters Converter
Set the strength and the heat.
Methanol kg to Liters Converter
Density set by temperature.
Paint kg to Liters Converter
Use the density on the paint label.
Primer kg to Liters Converter
Use the density of your brand.
Varnish kg to Liters Converter
Use the density of your brand.
Epoxy Resin kg to Liters Converter
Use the density of the resin.